8 Reasons to Call a 24 Hour Plumber in Toronto

Plumbing emergencies can be a stressful and scary experience. You never want to find yourself in an emergency situation with no help on the way. Whether it’s a blocked toilet, a wonky sink, or a recurring problem with the radiators – it can all be one big hassle.

In this article, we’ll talk about some of the reasons you should call a plumber for any routine or emergency plumbing issue you might have.

Smelly drain

If you notice an odd smell in your house, it could be a sign that you need to call a plumber. One of the most common causes of bad smells coming from drains is due to a build-up of grease and soap scum. This can happen over time if you don’t regularly clean your drains. Another cause of smelly drains is sewage backup. This is much more serious and should be addressed immediately by a professional. If you notice either of these signs, it’s best to call a plumber right away to avoid further damage.

Your sink is filling up with water when washing machine is on

If your sink is filling up with water when the washing machine is on, there could be a few different reasons. First, check to see if the washing machine is draining properly. If it isn’t, then the water could be backing up into the sink. Another possibility is that the sink and washing machine are connected to the same drain line and there is a blockage in that line. finally, check to see if the sink itself is plugged. If it is, then water will back up into the sink when the washing machine is on.

Low water pressure? 

One of the reasons you may need to call a plumber is if you experience low water pressure in your house all of a sudden. This could be due to a leak in your pipes or a problem with your water pump. If you have low water pressure, it may be difficult to take a shower, wash dishes, or do laundry. You may also notice that your pipes are making strange noises.

A sudden drop in water pressure is often a sign of a burst pipe. If this happens, it’s important to call a plumber right away. A burst pipe can cause serious damage to your home, and it can be very costly to repair. If you catch the problem early, you can avoid major damage and save yourself a lot of money.

Clogged Toilet

A clogged toilet is a common plumbing issue. It can be caused by many things, such as too much toilet paper, a foreign object being flushed down the toilet, or a build-up of waste material. There are several ways to fix a clogged toilet. The most common way is to use a plunger.

Simply place the plunger over the hole in the bottom of the toilet bowl and push and pull the plunger up and down. This will create suction and hopefully unclog the toilet. If that doesn’t work, you can try using a plumber’s snake. This is a long, flexible piece of metal that you insert into the toilet bowl and attempt to twist and turn until the clog is broken up.

If neither of these methods works, you may need to call a professional plumber to come and take care of it for you.

No Hot Water

It’s frustrating when you turn on the shower only to find that there’s no hot water. There could be several reasons for this.

There are a few possible reasons why you have no hot water. The first is that the power to your water heater may be turned off. The second is that the pilot light may be out. The third is that the thermostat may be set too low. The fourth is that there may be a problem with the gas line. The fifth is that the tank may be empty. The sixth is that there may be a leak in the tank.

Whatever the reason, it’s best to call a professional to take a look and fix the problem.

Sump Pump

If your basement is prone to flooding, a sump pump is a worthwhile investment. A sump pump is installed in the lowest part of your basement and helps to pump water out of the space to prevent flooding.

If you live in an area with a high water table or frequent heavy rains, a sump pump can give you peace of mind knowing that your basement is protected from flooding.

Tree Roots Growing Through Pipes

If you notice that your drains are backing up or water is coming out of them slowly, it could be because tree roots have grown through your pipes. This is a common problem, especially in older homes.

To repair this, you’ll need to have a professional come and clear the roots out of your pipes. They may also need to replace some of your pipes if they’re damaged. In the meantime, you can try using a plunger or a drain snake to clear the blockage.

Frozen Pipes

If you have frozen pipes, the first thing you should do is turn off the water to your home. This will help prevent any further damage to your pipes.

Next, you’ll need to thaw out your pipes. You can do this by using a hair dryer, heating pad, or space heater. Once your pipes are thawed, turn the water back on and check for any leaks. If there are any leaks, you’ll need to call a plumber to fix them.

If you are not sure what to do for plumbing problems, maybe it is better to call a plumber