Clogged toilet? Here is what you can do!

There are some issues that we just don’t know how to fix. This is true whether it’s a faulty washing machine, stubborn clogged toilet, or even a broken shower. Sometimes the problem is so difficult to resolve that you’re left with no other option but to call in the professionals! You have a clogged toilet, and you are out of ideas on how to unclog it. Don’t worry, with this article, you have no excuse not to get the job done. The right tools are all laid out before you in order to tackle this task successfully!

Why is my toilet clogged?

One of the most common problems is when toilet water backs up into the bowl. Toilet clogs are usually caused by a buildup of dirt and hair from defecating that prevents the water from draining properly. When there is not enough air in the drain, it can’t push the water down and out. Another common problem is when toilet paper doesn’t flush all the way down. In this case, if you have an older toilet or one that has seen heavy use, then you might need to replace your toilet. Before doing anything else, check to make sure your toilet’s flapper actually works and close it tightly!

How do you unclog a toilet with a plunger fast?

Use the plunger to clear water into the toilet. Increasing the water flow by pouring in more water will increase the suction power of the plunger. Hold down the handle of the plunger and plug up all of the holes with toilet paper. Make sure there is no water or other obstructions in front of it before you plunge. Ensure that your toilet is level by placing a board over its drain pipe before plunging. It’s best if you don’t flush after you’ve gone through this process, as this can cause more damage to your sink and plumbing system.

What if the Plunger won’t work?

When you’re trying to unclog a toilet that won’t drain, it feels like you’re wasting your time. But if the plunger doesn’t work for more than a minute, give up. It’s over. Instead of trying to fight nature and the plunger, step back and try this:
1. Pour about 2 inches of cold water into the tank first
2. Invert a bucket under the trapway
3. Place a small bucket underneath the overflow pipe
4. Mix 1 cup of CLR powder with 1 gallon of hot water and pour into the tank
5. Put the overflow pipe in place (it will take you a few tries to figure out how to do this)
6 . Turn the water on. If it’s clear after about 5 minutes, you’re good. If not, repeat and add CLR to the water as instructed. A simple and effective solution. You may have to use CLR several times, but it will save you a lot of aggravation

Use baking soda and vinegar to unclog your toilet

Baking soda and vinegar are two ingredients that can be used to unclog your toilet. One way to use these items is to pour a large amount of baking soda down the drain followed by vinegar. Allow them to sit for an hour before flushing. The other option is to pour vinegar into the toilet, leave it for about five minutes, then flush with water.

Unclog Your Toilet with Coat Hanger

One effective way to unclog a toilet is by using a coat Hanger. The dip in the hanger allows liquids to pass through and it won’t harm plumbing, so you can use it for this purpose again and again.

Toilet Still Won’t Unclog? Give Plumber To Your Door a Call!

If you have tried everything from plunging it, to flushing it, to using chemicals then it’s time to call a licensed plumber, to have a licensed plumber on your side, it can mean the difference between a timely repair and days of inconvenience, frustrating dealings with contractors, or even damage to your home. When you’re looking for help that’s reliable, call Plumber To Your Door.

Read Also: